Custom Character Setup
Import a character FBX, give it an Oriented armature and a modular rig, bring across any animation it came with, then export the result.
Your skeleton doesn’t need to be compatible with anything to import it. Compatibility only matters when the export has to go back onto an existing skeleton, which is covered in step 5.
If you only want to edit animation files, follow Edit Existing Animation instead.
Video
1. Import Custom Character
- Open
File > Import > Mr Mannequins FBX (.fbx). See Import Mr Mannequins FBX. - Select one or more character files. Files with the same bone names, hierarchy and root relative rest poses are merged onto one armature.
- Leave Target in the Retargeting panel on None.
- Leave Orient Armature off in the Orientation panel. It only acts when importing meshes onto a Target, and step 2 creates the armature directly.
- Check the settings that depend on your file:
- Remove Leaf Bones in the Cleaning panel is on by default, and removes bones that deform nothing but are parented to a bone that does.
- Decimate Keyframes in the Cleaning panel is None by default. Set it if the file has animation you want fewer keys on, though it can be slow on dense animation.
- Manual Orientation in the Advanced panel lets you set Scale, Forward and Up yourself, if the file’s embedded values don’t suit it.
- Confirm the import.
You get one armature named <file>_Skeleton for each different skeleton, with the meshes on it. Any animation in the files is imported too, with each action named after its file and stashed on the armature. It’s fine if there isn’t any, you just skip step 4 later.
2. Create Oriented Armature
- Select the imported armature so it’s active.
- In
Properties > Armature > Orientation, press Create Oriented Armature. In Pose mode you can also usePose > Apply > Create Oriented Armature. See Set Oriented Armature. - In the redo panel, leave Retarget Actions on.
The result is a pair of armatures:
- Original (
<name>_Original): the imported skeleton. It keeps the source bones that the meshes use and that get exported in the end, and it follows the armatures above it through binding constraints. - Oriented (
<name>_Oriented): sits above the Original with matching bone names and rolls that suit Blender. Modular rigging and retargeting both work from this one.
Any active and stashed actions are retargeted onto the Oriented armature and stashed there. Socket meshes on the Original are converted to skeletal meshes.
Pressing the button again reads Update Oriented Armature, and it works differently. It adds any bones the Original has that the Oriented doesn’t, but it doesn’t retarget actions or remove Oriented bones the Original no longer has.
3. Rig Custom Character
This step sets up one full biped using Add Rigging Module. Every other option a module has is covered in Rapid Rigging.
- Select the Oriented armature so it’s active, then enter Pose mode.
- Select the bones for a module, listed below.
- Pick the module from
Pose > Add Rigging, orShift + A. The first one creates<name>_Riggingabove the Oriented armature. - Check its settings in
Properties > Armature > Rigging Modules. - Repeat for the next module. The Rigging armature becomes active after each one, but modules only read Oriented bones, so keep selecting your bones on the Oriented armature.
Add these in order:
- Root Controls (Root): make the root bone active. Any other bones you have selected become motion followers, so don’t select extras unless you want that.
- Spline Chain (Spline Spine): select at least three connected spine bones. The first bone’s parent becomes the origin, if it has one. Count sets how many targets are spread along the chain, and Influences sets how many nearby targets blend together to drive each bone’s twist. Axis and Offset can stay as they are to start with.
- Curl Chain (Curl Head): select a separate connected neck and head chain of at least two bones. A character with only one suitable bone here can’t use this module this way.
- Opposable Arm (Opposable Arms): select at least the upper arm, lower arm and hand. The last bone in the chain is the ending, and the first bone’s parent is the origin.
- Plantigrade Leg (Plantigrade Legs): select at least the thigh, calf and foot. The foot is the ending, and the required Pivot is filled in from the foot’s first child, commonly a ball or toe bone. If that’s the wrong bone, change Pivot in the module’s settings.
- Curl Chain (Curl Fingers): add one module for each connected finger chain, with at least two bones in each. The first bone’s parent becomes the origin.
If you’ve selected too few bones, or a foot has no child bone to use as the Pivot, the module doesn’t build and goes back to Empty Module.
Mirror Rigging turns itself on when every selected bone has an opposite side bone, found through names like arm_l and arm_r or LeftArm and RightArm, and builds the other side for you. An origin with no side in its name, like pelvis, is shared by both. If your names don’t resolve, add the other side as its own module.
Edit Shared decides whether a module can edit and restyle a bone it shares with another module, like an origin. It’s on for the first module to claim a bone and off for later ones, so they don’t change it.
Don’t give the same chain bone to two modules. That isn’t a supported setup, and nothing stops you from selecting it, so check your selection. Sharing is only for origins and endings.
4. Optional: Retarget Existing Animations
Only do this if step 1 imported actions. They’re on the Oriented armature now, and they need baking onto the rig so you can animate them with its controls.
- Make the Rigging armature active, in Pose mode.
- Open
Pose > Apply > Retarget Actions From. See Retarget Actions. - In the redo panel, set Target to this character’s own Oriented armature. It’s listed even though Rigging is the highest tier. Nothing happens until you pick one.
- Leave Only Selected off for a complete bake.
- Set Keep Original. On keeps the Oriented actions and prefixes the new ones with the Original’s name. Off deletes the source actions and gives the new ones their names.
- Adjust Step Height if you need to. It controls how far a Plantigrade foot’s heel lifts before its ball hinge fully hands over to the foot control.
The new actions land on the Rigging armature. If the Oriented armature had an active action, its result is made active on Rigging, and everything else is stashed. Each bone’s retargeting settings and name mappings decide what matches, and an action with no matching bones is skipped.
5. Export Character
- Select the character’s meshes. Only Selected is on by default, and selecting a mesh also finds its armature. Selecting only an armature doesn’t export its meshes.
- Open
File > Export > Mr Mannequins FBX (.fbx). See Export Mr Mannequins FBX. - Pick a folder in the file browser. The file name you type is ignored, because names come from the meshes and actions.
- In the Meshes panel, leave Export on, and turn Batch Export off if you want all the meshes in one file.
- In the Actions panel, leave Export on if you did step 4, otherwise turn it off. Only Stashed is the default Method, and it doesn’t include an action that’s active but not stashed. Use All Actions if you need both.
- Leave Background Export on in the Advanced panel, so your open file isn’t changed.
- Confirm the export.
Actions are found on the highest tier, which is Rigging here, baked down through the hierarchy onto the Original, and written with it. Meshes export skinned to the Original too. With Keep Original on in step 4, the action names carry the prefix into their file names.
If the export has to go back onto an existing skeleton, the Original’s hierarchy and rest pose have to stay compatible with it, along with your import settings at the destination. Axes, scale and naming all depend on the destination, so check them there. Scale, Forward and Up are in the Advanced panel.
Limitations
- This is one biped setup. Other module types and skeletons are covered in Rapid Rigging.
- Actions only come across once. They’re only retargeted onto the Oriented armature when it’s created, so actions added to the Original later don’t come across on an update.
- Don’t rename, add or remove bones on the Original if the export has to go back onto an existing skeleton. The export writes whatever bones the Original has.
Related
Related Workflows
- Edit Existing Animation: importing, editing and exporting animation files.
- Rapid Rigging: creating and configuring modular animation rigs.